{"id":278,"date":"2026-09-24T01:27:15","date_gmt":"2026-09-24T01:27:15","guid":{"rendered":"https:\/\/processed-meat-equipment.com\/product\/lqdk-pneumatic-stretching-single-clipping-machine\/"},"modified":"2026-09-24T02:07:33","modified_gmt":"2026-09-24T02:07:33","slug":"lqdk-pneumatic-stretching-single-clipping-machine","status":"publish","type":"product","link":"https:\/\/processed-meat-equipment.com\/ko\/product\/lqdk-pneumatic-stretching-single-clipping-machine\/","title":{"rendered":"LQDK Pneumatic Stretching Single Clipping Machine"},"content":{"rendered":"
\n

Industrial Meat Processing Equipment \u00b7 processed-meat-equipment.com<\/p>\n

\n

Pneumatic Stretching for Compact, Uniform Large-Block Products<\/h2>\n

The LQDK addresses a specific and important gap in large-block meat product production: the need to simultaneously stretch and tension a large-diameter casing while applying a single, high-force seal clip \u2014 a task that manual clipping cannot perform consistently and that double-clipping machines are not designed for in the 120\u2013250 mm casing range.<\/p>\n

The stretching function is what separates the LQDK from a standard single clipping machine. When a large meat block is filled into a wide casing, the casing naturally assumes an irregular shape as the meat settles \u2014 air pockets form at the ends, the fill density is uneven, and the product cross-section at the clip point is not optimally compressed. The pneumatic stretching mechanism pulls the casing under controlled tension before the clip is applied, compressing the fill and producing a firm, fully-dense product end. The result is the slicing quality that retail and food service buyers specify: clean, consistent slices with no air pockets at the ends.<\/p>\n

The 74-large and 74-small U-type aluminum clip compatibility gives the LQDK two sealing force options within the same machine \u2014 the 74-large clip for high-density products in the upper end of the 120\u2013250 mm casing range, and the 74-small for lighter products where a slightly lower sealing force is appropriate. Switching between the two clip sizes requires changing the clip magazine, which is a quick operator-level procedure.<\/p>\n

At 35 kg, the LQDK is portable within the facility and can be repositioned to pair with different upstream filling machines without requiring a layout change. The 0.6\u20130.8 MPa operating pressure is at the upper end of standard workshop compressor output \u2014 confirm your air supply capacity before ordering if you are running multiple pneumatic machines on the same compressor circuit.<\/p>\n<\/div>\n

\"LQDK<\/div>\n
\n

Technical Specifications<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nValue<\/th>\nNotes<\/th>\n<\/tr>\n<\/thead>\n
Model<\/td>\nLQDK<\/td>\nPneumatic stretching single clipper<\/td>\n<\/tr>\n
Compatible Casing Diameter<\/td>\n120 \u2013 250 mm<\/td>\nLarge-diameter format<\/td>\n<\/tr>\n
Compatible Clips<\/td>\n74 Large \/ 74 Small<\/td>\nU-type aluminum clips<\/td>\n<\/tr>\n
Air Pressure<\/td>\n0.6 \u2013 0.8 MPa<\/td>\nUpper standard workshop pressure<\/td>\n<\/tr>\n
Machine Weight<\/td>\n35 kg<\/td>\nPortable within facility<\/td>\n<\/tr>\n
Stretching Mechanism<\/td>\nPneumatic, adjustable tension<\/td>\nControlled casing tensioning<\/td>\n<\/tr>\n
Sealing Performance<\/td>\nStrong clip force + reliable seal<\/td>\nUniform slice quality<\/td>\n<\/tr>\n
Recommended Pairing<\/td>\nQCT-01 Pneumatic Meat Filler<\/td>\nDirect inline integration<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n

How the Stretching Mechanism Improves Product Quality<\/h2>\n

Controlled Casing Tension Before Clipping<\/h3>\n

The LQDK’s pneumatic stretching system applies controlled tension to the casing at the clip point before the clip is pressed. This tension serves two purposes: it compresses the meat fill against the casing wall, eliminating the air pocket that forms at the end of a large-block filled casing; and it presents a smooth, uniformly-tensioned casing surface to the clip die, which produces a cleaner, more consistent clip formation than clipping a loose or irregular casing surface.<\/p>\n

Full Product Density at the Clip End<\/h3>\n

For sliced products \u2014 ham, salami, beef roll \u2014 the first and last slices from each unit are the quality test that retail buyers use to evaluate the product. Air pockets, loose fill, or irregular cross-section at the clipped ends produce undersized or structurally compromised end slices. The LQDK’s stretching function ensures that the fill is fully compressed at the clip point before sealing, which means the first slice from a clipped product end is as dense and uniform as slices from the centre.<\/p>\n

Adjustable Stretch Tension for Different Products<\/h3>\n

The stretching tension is pneumatically adjustable \u2014 different products require different tension levels. A firm restructured beef roll in a thick PVDC casing requires higher tension than a delicate lamb product in a thinner collagen casing. The LQDK allows operators to set the tension appropriate for each product without changing machine components, which makes it practical for multi-product operations that run different large-block formats across a production week.<\/p>\n<\/div>\n

\n

Clip Stock & Replacement Parts We Supply<\/h2>\n

We supply 74-large and 74-small U-type aluminum clips in food-grade specification for the LQDK. Clip consumption depends on your product format and production volume \u2014 we advise on order quantities at purchase time. The stretching mechanism seals and clip die are the primary wear items.<\/p>\n

\n\n\n\n\n\n\n\n\n\n
Part \/ Consumable<\/th>\nSpecification<\/th>\nNotes<\/th>\n<\/tr>\n<\/thead>\n
74-Large U-Type Aluminum Clips<\/td>\nBulk supply, food-grade<\/td>\nHigh-density large-diameter products<\/td>\n<\/tr>\n
74-Small U-Type Aluminum Clips<\/td>\nBulk supply, food-grade<\/td>\nLighter large-diameter products<\/td>\n<\/tr>\n
Clip Die Assembly<\/td>\nPer clip size, OEM tolerance<\/td>\nPrimary wear item<\/td>\n<\/tr>\n
Pneumatic Stretching Seal Kit<\/td>\nFull seal set, food-grade<\/td>\nReplace at recommended interval<\/td>\n<\/tr>\n
Air Valve & Regulator Assembly<\/td>\n0.6\u20130.8 MPa rated, OEM<\/td>\nControl valve + pressure regulator<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n

Customer Reviews<\/h2>\n
\n
\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n

“The LQDK transformed our ham roll end quality. Before we had air pockets at the clipped ends that produced unusable first and last slices \u2014 about 80 g waste per unit. The pneumatic stretching compresses the fill completely before clipping and now our end slices are as dense as centre slices. The 74-large clip holds well on our 200 mm casing.”<\/p>\n

\u2014 Quality Manager, Ham Roll Producer \u00b7 Italy<\/div>\n<\/div>\n
\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n

“We pair the LQDK with the QCT-01 pneumatic filler for our whole-muscle pork products in 160 mm casing. The two-machine cell runs on one air supply and two operators handle the full fill-and-clip cycle at commercial throughput. The LQDK stretching tension is adjustable and we’ve dialled it in perfectly for our casing type.”<\/p>\n

\u2014 Line Manager, Formed Meat Plant \u00b7 Australia<\/div>\n<\/div>\n
\n
\u2605\u2605\u2605\u2605\u2606<\/div>\n

“Good machine for our large-diameter lamb sausage in 230 mm casing. The 74-small clip suits our lighter product well. The stretching function gives us uniform end compression that our previous manual clipping never achieved. Minus one star because 0.8 MPa is at the top of our compressor’s output range \u2014 we had to upgrade the compressor, which we hadn’t budgeted for.”<\/p>\n

\u2014 Operations Manager, Specialty Lamb Producer \u00b7 New Zealand<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n

\uc790\uc8fc \ubb3b\ub294 \uc9c8\ubb38<\/h2>\n
\n
\nWhat is the difference between the LQDK and the U-shape manual clipping machine?+<\/span><\/summary>\n
The LQDK is a pneumatically-operated machine that stretches the casing under controlled tension before applying a single clip \u2014 producing compact, fully-dense product ends suitable for sliced retail products. The U-shape manual clipping machine applies a U-type clip manually without stretching, making it suitable for fresh sausage, specialty runs, and products where casing tension before clipping is not required. For large-block products destined for slicing, the LQDK produces significantly better end quality.<\/div>\n<\/details>\n
\nWhat clip types does the LQDK use?+<\/span><\/summary>\n
The LQDK uses 74-large and 74-small U-type aluminum clips. These are a specific large-format U-clip designed for the 120\u2013250 mm casing diameter range. They are not interchangeable with the 501\/502\/503\/506 clips used in the manual U-shape clipping machine or the standard aluminum wire clips used in the JLSK-II and CSK-15\/18 double clipping machines. We supply both 74-large and 74-small clip stock directly.<\/div>\n<\/details>\n
\nWhat air pressure does the LQDK require and can my existing compressor supply it?+<\/span><\/summary>\n
The LQDK requires 0.6\u20130.8 MPa<\/strong>, which is at the upper end of standard workshop compressor output. Most industrial workshop compressors rated at 0.8 MPa will supply the LQDK adequately. If you are running other pneumatic equipment on the same circuit, check that your compressor’s sustained output at the point of use remains \u2265 0.6 MPa under the combined load. We advise on compressor sizing at order time if you provide your existing air supply specification.<\/div>\n<\/details>\n
\nCan the LQDK clip both ends of a filled casing in one operation?+<\/span><\/summary>\n
The LQDK is a single<\/em> clipping machine \u2014 it applies one clip per operation. For double-end clipping (clip on both ends in a single automated cycle), the JLSK-II or CSK-15\/18 double clipping machines are the appropriate choice. For large-diameter products where double-end automation is not required and the focus is on achieving compressed, high-quality single-end clips on the 120\u2013250 mm casing range, the LQDK is the correct machine.<\/div>\n<\/details>\n
\nWhat is the production lead time and how is commissioning handled?+<\/span><\/summary>\n
Standard lead time is 20\u201330 working days<\/strong> from order confirmation. Factory acceptance testing is completed before shipping. Remote commissioning via video call covers startup, stretching tension adjustment for your specific casing and product type, clip magazine loading, and the cleaning procedure. For buyers pairing the LQDK with the QCT-01 pneumatic filler, we provide integrated commissioning guidance for the two-machine cell as a combined session.<\/div>\n<\/details>\n<\/div>\n<\/div>\n
\n

Get a Factory Price & Lead Time<\/h2>\n

Send us your production requirements and we will reply with a factory price and full specification within one business day. Learn more on our \ud68c\uc0ac \uc18c\uac1c<\/a> page.<\/p>\n

\u2709 sales@processed-meat-equipment.com<\/a>
\n\ud83d\udcde +86 130 8398 8828<\/a><\/div>\n

Shenhua Road, Hangzhou, China 310031 \u00b7 Contact Form \u2192<\/a><\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

A factory-direct alternative to manual large-block single clippers, the LQDK applies 74-large and 74-small U-type aluminum clips to 120\u2013250 mm casings with adjustable pneumatic stretching tension for compact, fully-dense product ends \u2014 0.6\u20130.8 MPa air pressure, 35 kg portable frame, pairs directly with the QCT-01 pneumatic meat filler.<\/p>","protected":false},"featured_media":217,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[23],"product_tag":[],"class_list":["post-278","product","type-product","status-publish","has-post-thumbnail","product_cat-clipping-machines","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/product\/278","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/comments?post=278"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/media\/217"}],"wp:attachment":[{"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/media?parent=278"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/product_brand?post=278"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/product_cat?post=278"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/processed-meat-equipment.com\/ko\/wp-json\/wp\/v2\/product_tag?post=278"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}